Correo 
Tel 
Saentis Analytical
Así como Säntis es inconfundible, también lo es Säntis Analytical AG. Valoramos nuestro propio estilo e independencia.
En busca de la solución perfecta
Saentis es un equipo pequeño, acostumbrados a unirnos cada día y dar lo mejor para los clientes, socios y proveedores. No solo por un sentido del deber, no solo porque nos esforzamos por alcanzar altos estándares de calidad, sino también porque nos divertimos.
La gestión está en manos de Erich Wick y Michael Steiger. Los dos se ocupan de sus inquietudes personalmente y en sociedad.
La gestión está en manos de Erich Wick y Michael Steiger. Los dos se ocupan de sus inquietudes personalmente y en sociedad.
Productos
Combustion tube «U-Tube» (P/N LECO: 616-108)
Combustion tube FP428 (P/N LECO: 609-116)
Inner pyrolyses tube (P/N LECO: 608-130)
Ceramic inner combustion tube , 346/44 mm (P/N LECO: 606-313)
Ceramic outer combustion tube , 375/57 mm (P/N LECO: 606-309)
Transparent quartz red/ox tube, 310/22/14.5 mm (P/N LECO: 605-875)
Combustion tube (P/N LECO: 601-506)
Combustion tube (P/N LECO: 601-438)
Transparent quartz catalyst tube (P/N LECO: 601-437)
Inconel boat «big with edge», 54 x 18 x 13.3 mm (P/N LECO: 575-049)
Inconel boat «big without edge», 54 x 18 x 13.3 mm (P/N LECO: 575-049)
Inconel boat «small with edge», 54 x 18 x 9 mm (P/N LECO: 575-047)
Inconel boat «small without edge», 54 x 18 x 9 mm (P/N LECO: 575-047)
Ceramic cover large (P/N LECO: 529-048)
Ceramic crucibles large 20cc , for TGA (P/N LECO: 529-047, 621-331)
Ceramic cover small (P/N LECO: 529-043)
Ceramic crucibles small 16cc , for TGA (P/N LECO: 529-042)
Silver capsules for solids, 3.2 x 4 mm (P/N LECO: 502-206, 502-293)
Powder Carbon Black , 40+ mesh (P/N LECO: 502-196)
Alumina Oxide Pellets (P/N LECO: 502-188)
EDTA standard, (approx. 41.09% C, 5.52%H, 9.58% N, 43.80% O) (P/N LECO: 502-092, 502-896, 502-806-250)
N-Catalyst (1% Platinum) (P/N LECO: 502-049)
Copper turnings, wire (P/N LECO: 501-621, 502-258, 502-295, 502-656)
Rare earth copper oxide (P/N LECO: 501-170)
O-Ring für GSD500/GDS500A (P/N LECO: 156-003)
aquatak®
aquatak®
Nickel boat liner for Liquid Samples, 50 x 15 x 8 mm (P/N LECO: 502-343, 763-065)
Combustion Boat , for SC132/32/CR-12 (P/N LECO: 528-203-250)
Cflex Tube, 36″ / 91.44 cm (P/N LECO: 601-691-036)
Cflex Tube, 30″ / 76.2 cm (P/N LECO: 601-691-030)
Graphite Crucible, RHN600 (P/N LECO: 619-895-100)
Lower Crucible, CHN (P/N LECO: 625-511-154)
Ureth Tubing, .061 x .12 OD, Orange, Per Foot (P/N LECO: 603-052)
Ureth Tubing, .061 x .12 OD, White, Per Foot (P/N LECO: 603-051)
Ureth Tubing, .061 x .12 OD, Black, Per Foot (P/N LECO: 603-050)
Ureth Tubing, .061 x .12 OD, Green, Per Foot (P/N LECO: 603-049)
Ureth Tubing, .061 x .12 OD, Blue, Per Foot (P/N LECO: 603-048)
Ureth Tubing, .061 x .12 OD, Red, Per Foot (P/N LECO: 603-047)
Electrode Insert , Rhen602 With Automation (P/N LECO: 611-351-180)
Element Clips (P/N LECO: 625-068)
Upper Electrode Cleaning Brush (P/N LECO: 625-711-186)
Upper Electrode Cleaning Brush (P/N LECO: 675-711-182)
Silicone Rubber Tube, 3/8″ x 19″ (P/N LECO: 501-110-019)
10mm Hole Cover (P/N LECO: 528-043, 619-880, 619-880)
Directive Middle Tube , CHNS (P/N LECO: 619-777)
Reagent Tube 233mm (P/N LECO: 619-776)
Lance, Truspec, CHNS Micro (P/N LECO: 619-774)
Braided Strap (P/N LECO: 619-566)
Finger Arm , for AR1207 Shaft (P/N LECO: 609-474)
Large Reagent Tube (P/N LECO: 619-455)
Straight Reagent Tube, for Truspec (P/N LECO: 619-425)
Catalyst Tube, TC500, RC612 (P/N LECO: 789-412)
Large Volume Reagent Tube, for Truspec (P/N LECO: 619-316)
1/4″ Rubber Sleeve (P/N LECO: 589-305)
Radial Shaft Seal, FP2000 Autoloader (P/N LECO: 609-271)
High sensitivity reagent tube (P/N LECO: 619-268)
Thermocouple, for Truspec Type K (P/N LECO: 619-233, 660-010-130)
Combustion Boat , S144 (P/N LECO: 529-204)
Tubing Cellulosic, .210ID (P/N LECO: 609-172)
Catalyst heater tube (P/N LECO: 619-154)
Lance Tube Assembly, 5.12 LG, CS230 (P/N LECO: 789-118)
Ceramic Boat Stop, Medium Flow (P/N LECO: 782-079-115)
Ceramic Tube , TF-10, 11/4″ x 23″ L (P/N LECO: 529-046)
Cone Support D (P/N LECO: 529-031)
Boat Stop Half , SC132/32 (P/N LECO: 782-079-110)
Boat Stop Half, Honeycomb Fine (P/N LECO: 529-022, 782-079-120)
Boat Stop Kit , (2 x AR9012) (P/N LECO: 529-012)
Ceramic Liner , SC32/132/CR-12 (P/N LECO: 529-011)
Reagent Tube, TC600 (P/N LECO: 618-809)
Combustion Tube, Ceramic, CHN1000 (P/N LECO: 608-505)
Combustion Tube Insulator, FP528 (P/N LECO: 778-379)
Quartz Wool Strips, 15″ (P/N LECO: 608-379)
Furnace Element, CHN 1000 (P/N LECO: 783-193)
Combustion tube, Old Syle, CHN1000, 14mm OD x 200mm (P/N LECO: 608-339)
Combustion Tube 1 , 1/8 x 30″ TE (P/N LECO: 528-332)
Combustion Tube 1 , 1/4″ x 30″ OBE (P/N LECO: 528-314)
Combustion Boat , SC32/132/CR12 (P/N LECO: 529-203)
Combustion Boat , SC132,32,CR12 (P/N LECO: 528-203)
Combustion Boat, 4″ x 1/2″ (P/N LECO: 528-053)
Filtering crucibles, Large (P/N LECO: 528-030)
Filtering Crucible (P/N LECO: 528-028)
Filtering crucibles, Small (P/N LECO: 528-028)
Graphite Crucible, High Temp, H=0.96″ x OD=0.500″ (P/N LECO: 782-720, 782-720-S)
Graphite Crucible, High Temp, H=0.96″ x OD=0.500″ (P/N LECO: 782-720, 782-720-S)
Large Graphite Crucible (P/N LECO: 780-890)
Quartz Filter Tube, TC500 (P/N LECO: 617-716)
Large Crucible , for Liquid Samples (P/N LECO: 616-605)
Filter Tube, TC500, RC612 (P/N LECO: 617-548)
Micro Screen Filter, TCH600 (P/N LECO: 617-441)
Thermocouple Only (P/N LECO: 772-522, 777-073)
Quartz Liner , for AR7060 (P/N LECO: 777-066)
Shield & Collar , for Pedestal (P/N LECO: 776-922)
2 Hole Lance Tube, FP2000, 245mm (P/N LECO: 606-747)
Purifier Tube, SC432 (P/N LECO: 606-655)
#2 Stepped Ceramic Boat Stop (P/N LECO: 606-444)
Lance, SC-432 & FP-2000, 253mm (P/N LECO: 616-632)
Heat Elements (4) , SC432, SC144 (P/N LECO: 606-601)
Finger Arm , for AR6547 (P/N LECO: 606-550)
Boat Puller, SC432 Autoloader (P/N LECO: 606-547)
Particle Filter, FP528 (P/N LECO: 616-504)
Drilled Lance Tube, SC432 (P/N LECO: 772-403)
Drilled Lance Tube, FP2000 (P/N LECO: 606-340)
Gas Drying Tube , SC432 (P/N LECO: 606-327)
Braid Clamp , for SC432 Element (P/N LECO: 606-320)
Lead Wire Braided 6.5, SC-432 (P/N LECO: 606-319)
Stainless Purge Tube , for SC432 (P/N LECO: 789-114)
ADAPTOR ASSEMBLY, SC-432 (P/N LECO: 606-316)
Stepped Ceramic Boat Stop, SC432 (P/N LECO: 606-308)
Thermocouple, RC612 (P/N LECO: 625-501)
Graphite crucibles (P/N LECO: 776-247)
10 Micron Filter, 1gpm (P/N LECO: 776-234)
Thermocouple, SC432 Series (P/N LECO: 606-224)
Electrode Insert , for 619-895 Crucible (P/N LECO: 619-896)
Lance , FP528 (P/N LECO: 616-146)
Outer combustion tube (P/N LECO: 616-089)
Stepped Boat Stop, S/SC-144 (P/N LECO: 616-086)
Inner combustion tube (P/N LECO: 616-070)
Boat Puller, Sulfur/Carbon (P/N LECO: 616-063)
Pneumatic (Air) , Regulator Assembly (P/N LECO: 766-036)
Wire Cleaning Brush, SC32/132 (P/N LECO: 775-859)
Pedestal Adapter, CS144-CS444 (P/N LECO: 605-815)
Pedestal Adapter Assembly (P/N LECO: 605-814)
Motor Brush , for 774-571 (P/N LECO: 175-631)
Pump Repair Kit, SC32/132 (P/N LECO: 175-590)
Inner Graphite Crucible (P/N LECO: 775-431)
Inner Graphite Crucible (P/N LECO: 775-431)
Secondary Filter (P/N LECO: 775-306)
Combustion Boat, Glazed for Liquids (P/N LECO: 528-230)
Combustion Tube, RC612 (P/N LECO: 625-505-168)
Heating Element Assembly , RC612 (P/N LECO: 625-505-138)
Catalyst Heater Tube , RC612 (P/N LECO: 625-505-125)
Combustion Tube, RC612 (P/N LECO: 625-510-402)
Heating Elements, Set (P/N LECO: 625-067-120)
Lance, FP528 (P/N LECO: 614-962)
Large Crucible, FP 528 Truspec (P/N LECO: 614-961, 614-961-110)
Vacuum Pump , for SC32/132, 24VDC (P/N LECO: 774-571)
Vacuum Pump , for Early SC32 110VAC (P/N LECO: 774-570)
Teflon Flx Tubing, .125 x .032W, ft (P/N LECO: 604-496)
Capsule Holder (P/N LECO: 604-373)
Combustion tube HF-402/RH402 (P/N LECO: 604-241)
Helium Regulator Assembly (P/N LECO: 764-216)
AC Crucibles, SST (P/N LECO: 774-204)
Purge Tube, SC32/132 (P/N LECO: 774-174, 789-116)
Hex Jam Nut , for AR5814 (P/N LECO: 194-060)
Nitrogen in soil standard, (approx. 0.5% N)
Composite soil standard, (approx. 0.92% C) (P/N LECO: 502-062)
C/S in soil standard, (approx. 0.1% C, 0.1% S)
C/S in soil standard, (approx. 1.26% C, 1.25% S)
C/S in soil standard, (approx. 0.50% C, 0.44% S) (P/N LECO: 502-318)
C/S in soil standard, (approx. 2.24% C, 2.08% S) (P/N LECO: 502-308)
C/S in soil standard, (approx. 1.18% C, 0.12% S)
Limestone standard, 5.87% C, 0.029% S
Limestone standard, (approx. 12% C, 0.04% S) (P/N LECO: 502-309)
Ore standard, 30g, C=7.62%, S=3.25% (P/N LECO: 502-372)
Ore standard (approx. values 4.19% C, 4.07% S) (P/N LECO: 502-320)
Ore standard, 30g, C=1.42%, S=1.41% (P/N LECO: 502-319)
Combustion Tube Repair Service (P/N LECO: 773-932)
Delivery Tube , for SC32/132 (P/N LECO: 773-928)
Ceramic crucibles (P/N LECO: 528-050)
Ceramic crucibles (P/N LECO: 528-018)
Unfluted Cleaning Brush (P/N LECO: 773-314)
Upper Electrode Brush, 21mm diameter (P/N LECO: 619-803, 783-302, 625-711-186)
Brush End, .38 Diameter (P/N LECO: 783-301)
Fitting, SS , for FP428 (P/N LECO: 773-136)
Zinc sulfide standard, (approx. 32.90% S) (P/N LECO: 502-085, 502-699)
Lube oil, (approx. 29.67% S) (P/N LECO: 502-071)
Lube oil, (approx. 4% S) (P/N LECO: 501-099)
Lube oil, (approx. 2% S) (P/N LECO: 764-547)
Lube oil, (approx. 1% S) (P/N LECO: 764-546)
Lube oil, approx. 0.25% S (P/N LECO: 764-545)
#2 Diesel Oil (P/N LECO: 501-458)
Residual oil, (approx. 0.99% S) (P/N LECO: 501-095)
Combustion Tube Ring Holder (P/N LECO: 772-906)
Vacuum Filter , for CS444 (P/N LECO: 782-880)
Ultimate coal standard (P/N LECO: 501-648)
Inner Crucible for SAAR2703S, thicker wall (P/N LECO: 782-795)
Hi Purity Outer Graphite Crucible, thickness: 1.5mm (P/N LECO: 782-703-100)
Vacuum Cleaner, Specify , 110/220 VAC (P/N LECO: 782-601, 789-122)
Chopper Motor (P/N LECO: 772-560)
Teflon Tubing, 1/4″ OD (P/N LECO: 172-505)
Porous Crucible, CHN (P/N LECO: 502-489)
Quartz Catalyst Tube, RC-412 (P/N LECO: 782-428)
Lance SC-32/132/CR-12 (P/N LECO: 772-402)
Lance Cleaning Wire (P/N LECO: 772-381)
Heater Particulate Filter (P/N LECO: 502-374)
Furnace Reagent, MGO (P/N LECO: 502-359)
Nickel basket 1.5g, low oxygen (P/N LECO: 502-345)
Steel Wool Filter Material (P/N LECO: 502-310)
Sulphamethazine OAS (P/N LECO: 502-209)
Tube Cleaner, 8mm x 4ft, FP428 (P/N LECO: 502-007)
Nickel capsules for liquids, 6.7 x 10.0 mm (P/N LECO: 502-183)
Fine Quartz Wool, 4-12 Micron (P/N LECO: 502-177, 502-314)
Sansorb II, CO2 Absorbent, 8-20 Mesh (P/N LECO: 502-176-HAZ)
Sansorb II, CO2 Adsorbent, 0.8 to 1.6mm (P/N LECO: 502-174-HAZ, 502-168-HAZ)
Fluorhibit (P/N LECO: 502-156, 502-493)
Benzoic acid tablet, 1.45g (P/N LECO: 502-134, 502-892)
Benzoic acid tablet, 1.45g (P/N LECO: 502-134)
Nickel Boat Liners, for AR1335 (P/N LECO: 782-059)
Combustion tube (P/N LECO: 783-299)
Rice flour, CHNS (P/N LECO: 502-278)
Barley, CHNS (P/N LECO: 502-277)
Oat meal, CHNS (P/N LECO: 502-276)
Corn Meal SRM (P/N LECO: 501-563)
Sucrose (P/N LECO: 501-046, 501-441, 501-563)
Rye flour, CHNS (P/N LECO: 502-275)
Wheat flour, CHNS (P/N LECO: 502-274)
Alfalfa standard (approx. 3.52% N, 0.27% S) (P/N LECO: 502-273)
Corn gluten, CHNS (P/N LECO: 501-272)
Soy Bean Meal SRM (P/N LECO: 501-561)
Slotted SS Cleaning Brush (P/N LECO: 619-591-970)
Brass Brush (P/N LECO: 619-591-969)
Coal standard (approx. 77.10% C, 1.88% H, 1.00% N)
Nickel Calibration Wire (P/N LECO: 501-951)
Coal standard (approx. 62.34% C, 3.31% H, 1.01% N)
Reagent tube, for CS744 and CS844 (P/N LECO: 619-591-740)
Prox coal standard, (approx. 0.55% S)
Prox coal standard, (approx. 6.18% S) (P/N LECO: 501-433)
Prox coal standard, (approx. 3.62% S) (P/N LECO: 501-957)
Prox coal standard, (approx. 2.95% S) (P/N LECO: 501-432)
Prox coal standard, (approx. 2.34% S) (P/N LECO: 501-369)
Prox coal standard, (approx. 1.91% S) (P/N LECO: 501-431)
Prox coal standard, (approx. 1.42% S) (P/N LECO: 501-430)
Prox coal standard, (approx. 1.2% S) (P/N LECO: 501-429)
Prox coal standard, (approx. 0.79% S) (P/N LECO: 501-955)
Prox coal standard, (approx. 0.52% S) (P/N LECO: 501-428)
Prox coal standard, (approx. 0.39% S)
Coal standard, (approx. 5.88% S) (P/N LECO: 501-964)
Coal standard, (approx. 5.59% S) (P/N LECO: 501-184, 502-438)
Coal standard, (approx. 4.1% S) (P/N LECO: 501-130, 502-674)
Coal standard, (approx. 3.6% S) (P/N LECO: 501-022)
Coal standard, (approx. 2.8% S) (P/N LECO: 501-020, 502-437, 502-673)
Coal standard, (approx. 2.63% S) (P/N LECO: 767-758)
Coal standard, (approx. 2.03% S) (P/N LECO: 767-757, 502-672)
Coal standard, (approx. 1.41% S) (P/N LECO: 501-014, 502-436)
Coal standard, (approx. 1.04% S) (P/N LECO: 501-005, 502-435, 502-671)
Coal standard, (approx. 0.89% S)
Coal standard, (approx. 0.45% S) (P/N LECO: 501-001, 502-433)
Coal standard, (approx. 0.38% S) (P/N LECO: 502-383)
Particle filter (P/N LECO: 619-591-699)
125 Cflex Tubing, 12″ / 30 cm (P/N LECO: 601-691)
1g O/N in steel pin standard, (approx. 0.0006% O, 0.0020% N)
1g O/N in steel pin standard, (approx. 0.0037% O, 0.0540% N)
1g O/N in steel pin standard, (approx. 0.0039% O, 0.0214% N) (P/N LECO: 501-645)
1g O/N in steel pin standard, (approx. 0.0100% O, 0.0102% N)
1g O/N in steel pin standard, (approx. 0.0112% O, 0.0057% N)
1g O/N in steel pin standard, (approx. 0.0029% O, 0.145% N)
Spatula (P/N LECO: 501-614)
Quartz Wool Wadding (P/N LECO: 501-608)
Inner combustion tube (P/N LECO: 625-601-555)
Outer combustion tube (P/N LECO: 625-601-554)
Combustion tube (P/N LECO: 601-506)
Pelletizing Foiler Device (P/N LECO: 601-490)
Lance Tube, Truspec, 225 mm (P/N LECO: 625-401-352)
Stainless Steel Purge Tube (P/N LECO: 625-401-294, 625-401-317)
Quartz reagent tube, for CS744 and CS844 (P/N LECO: 619-591-315)
Reagent tube, CS744 CS844 OHN836 (P/N LECO: 619-591-314)
Electronic Balance, 4th Place (P/N LECO: 751-300-160)
Crucible Holder Tray (P/N LECO: 501-265)
Puller Shaft Assembly , with Finger (P/N LECO: 611-207)
Pipette Brush (P/N LECO: 502-005)
Reaction Tube DH103 (P/N LECO: 601-201)
Catalyst Tube (P/N LECO: 611-351-142)
Reagent tube, for OHN836 (P/N LECO: 625-711-117)
Reagent tube, OHN836 (P/N LECO: 625-711-116)
Acentanilide (P/N LECO: 501-053)
Zircon crucible (P/N LECO: 501-045)
Pin Tube Holder (P/N LECO: 511-038)
Calcium Carbonate, 12% (P/N LECO: 501-034)
Quartz catalyst tube (P/N LECO: 619-590-412)
Quartz catalyst tube (P/N LECO: 619-590-409)
Reagent tube, OHN836 (P/N LECO: 625-710-392)
RF Choke , for 521/523 (P/N LECO: 550-047)
Side arm cleaning brush, for Leco (P/N LECO: 601-981)
Particle Filter, SC32/132/RC612 (P/N LECO: 768-980)
Glass Scoop, TRUMAC (P/N LECO: 776-978)
Heating Element , for SC32/132/CR12 (P/N LECO: 772-508, 776-962, 783-177)
C/S/N powdered metal standard, (approx. 0.022% C, 0.0093% S, 0.041% N)
C/S/N chip standard, (approx. 0.121% C, 0.0221% S, 0.036% N)
C/S/N chip standard, (approx. 0.015% C, 0.023% S, 0.068% N, 0.012% O)
C/S/N chip standard, (approx. 0.179% C, 0.104% S, 0.0101% N)
C/S/N chip standard, (approx. 0.474% C, 0.288% S, 0.0072% N)
C/S/N chip standard, (approx. 0.204% C, 0.0284% S, 91PPM N)
C/S/N chip standard, (approx. 0.401% C, 0.0209% S, 0.0067% N)
C/S/N chip standard, (approx. 0.929% C, 0.006% S, 53PPM N)
C/S/N chip standard, (approx. 0.470% C, 0.021% S, 104PPM N)
C/S/N chip standard, (approx. 0.147% C, 0.027% S, 0.0116% N)
C/S/N chip standard, (approx. 0.055% C, 0.0103% S, 0.0058% N)
C/S/N chip standard, (approx. 0.0137% C, 0.027% S, 860PPM N)
C/S/N chip standard, (approx. 0.506% C, 0.078% S, 0.0090% N)
C/S/N chip standard, (approx. 0.389% C, 0.094% S, 121PPM N)
C/S/N chip standard, (approx. 0.0026% C, 0.0046% S, 0.0015% N)
Handle Only, for AR938 (P/N LECO: 782-942)
Composite Brush , for 782-942 (P/N LECO: 782-938)
Crucible tongs (P/N LECO: 761-929)
Printer Paper Roll (P/N LECO: 780-927)
Printer Ribbon (P/N LECO: 780-928)
Quartz Pedestal Post , CS144-444 (P/N LECO: 604-114, 776-923)
Pedestal , CS-125 (P/N LECO: 780-953)
Oxygen Lance (P/N LECO: 762-062)
Platinized Silica
Platinized Silica (P/N LECO: 501-587)
Catalyst heater tube (P/N LECO: 780-911)
Scoop (P/N LECO: 503-032)
Ignitor (P/N LECO: 519-005)
Honeycomb Support, 1.25W x 1.5L FP (P/N LECO: 780-899)
1g C/S pin standard, (approx. 0.168% C, 0.087% S)
1g C/S pin standard, (approx. 0.275% C, 0.022% S) (P/N LECO: 501-677)
1g C/S pin standard, (approx. 0.544% C, 0.0096% S)
1g C/S pin standard, (approx. 1.55% C, 0.0131% S)
1g C/S pin standard, (approx. 0.0108% C, 0.0024% S)
1g C/S pin standard, (approx. 0.033% C, 0.033% S)
1g C/S pin standard, (approx. 0.097% C, 0.0178) (P/N LECO: 501-676)
1g C/S pin standard, (approx. 1.06% C, 0.0213% S)
1g C/S pin standard, (approx. 0.078% C, 0.214% S)
1g C/S pin standard, (approx. 0.738% C, 0.024% S)
1g C/S pin standard, (approx. 0.810% C, 0.0076% S) (P/N LECO: 501-679)
1g C/S pin standard, (approx. 0.445% C, 0.0121% S) (P/N LECO: 501-678)
1g C/S pin standard, (approx. 0.190% C, 0.022% S)
1g C/S pin standard, (approx. 0.064% C, 0.0229% S) (P/N LECO: 501-675)
1g C/S pin standard, (approx. 0.016% C, 0.0019% S) (P/N LECO: 501-674)
Quick Disconnect Tube, 4″x, Straight, FP228 (P/N LECO: 775-880)
1g C/S ring standard, (approx. 0.271% C, 0.0206% S)
Handle Only , for AR877 (P/N LECO: 782-918)
Tim Step Brush , for 782-918 (P/N LECO: 782-877)
1g C/S ring standard, (approx. 0.546% C, 0.0082% S)
1g C/S ring standard, (approx. 0.801% C, 0.0132% S) (P/N LECO: 501-506)
1g C/S ring standard, (approx. 0.658% C, 0.0109% S) (P/N LECO: 501-505)
1g C/S ring standard (aprox. 0.425% C, 0.0088% S) (P/N LECO: 501-504)
Graphite Hi-Density , Hi-Temp Crucible (P/N LECO: 782-720SHD)
1g C/S ring standard, (approx. 0.161% C, 0.022% S) (P/N LECO: 501-503)
1g C/S ring standard (approx. 0.035% C, 0.017% S) (P/N LECO: 501-502)
1g C/S ring standard, (approx. 0.019% C, 0.014% S)
Cflex Tubing , .187″/foot (P/N LECO: 608-866)
